LogoLogo
Buy SoftwareBuy HardwareOpen a ticket
Rekor Edge Pro
Rekor Edge Pro
  • 📹Introduction
  • 📜Register Your Product
  • ⚡Connecting
    • Overview
    • Powering
    • Configuration Dashboard
      • Access
      • First Time Login
      • Device Settings
      • Mobile Network Settings
      • Licensing
      • Data Destination
  • 🛠️Installing
    • Overview
    • Packing List
    • Cable Interface
    • Assembly
      • SIM Card Installation
      • Sun Shield Cover
      • Mounting Bracket
    • Mounting
    • Cable Connection
    • Waterproofing and Insulation
    • Installation Checklist
  • ⚙️Configuring
    • Overview
    • Location
    • Camera Configuration
    • LPR Configuration
  • 📋Calibration Tips
    • Overview
    • Quick Reference Guide
    • Specifications, Requirements, and Capabilities
    • Calibration
    • Getting Help
Powered by GitBook
LogoLogo

Platforms

  • Rekor Discover® for Urban Mobility
  • Rekor Command® for Transportation
  • Rekor Scout® for Public Safety

Systems

  • Rekor Edge Flex™ (Classificaiton)
  • Rekor Edge Max™ (Classification)
  • Rekor Edge Pro (ALPR)
  • Rekor Edge Max™ (ALPR)

Developers

  • Vehicle Recognition SDK
  • Rekor CarCheck®
  • Rekor AutoNotice™

Resources

  • About Us
  • Customer Stories
  • Newsroom
  • Help Center

© 2025 Rekor Systems, Inc. All Rights Reserved.

On this page

Was this helpful?

  1. Installing
  2. Assembly

Mounting Bracket

PreviousSun Shield CoverNextMounting

Last updated 1 month ago

Was this helpful?

  1. Disassemble the top of the mounting base from the bottom of the mounting base plate.

  2. Drill a hole for ethernet cable into the mounting structure (pole, building, etc.). This cable will feed into the base plate.

  3. Attach the base plate to the pole, using the appropriate hardware.

  4. Attach the camera to the mounting base using the included hardware, ensuring the rubber grommet is positioned so that cables can be fed through the slits in the grommet.

  5. Once the camera is secure, attach the mounting base to the base plate that was previously attached to the structure. Note: Don’t forget to plug in the ethernet cable before mounting.

Don’t forget to plug in the ethernet cable before mounting.

🛠️