# Initial Setup

Initial setup for Discover Class, Count and Speed will be accomplished in 3 easy steps.

1. Set up Stations, or locations where your cameras will be placed in your traffic studies. 
2. Rekor engineers will assist in connecting  and calibrating your devices, or cameras that are installed for the studies. You will then run a device self check.
3. Set up Studies by assigning which stations and devices will be used in your traffic studies.

Let's get started!

<figure><img src="/files/iHBhj3rloqd5Jd0kJI4b" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.rekor.ai/rekor-discover-r/class-count-and-speed/markdown.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.