# Stream Configuration

Click Stream in the left frame to configure the Stream settings.

### General and Zipstream

1\.      Set the Resolution to 1920x1080. If the system is a two+ camera system and the roads are 1-2 lanes, dropping to 720p may improve performance.

2\.      Set the Frame Rate to 30. The P=frames should be set to 25.

3\.      Set the Compression to 45%.

4\.      Set the Zipstream to Low. Dynamic FPS and Dynamic GOP should be Off.

<figure><img src="/files/vgVDkcKEL0TuazYZK9d7" alt=""><figcaption></figcaption></figure>

### Bitrate and Orientation

1\.      The Bitrate Control should be set to Maximum.

2\.      Mirror should be Off.

<figure><img src="/files/4sPI6K71zsymGlg7nBLB" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.rekor.ai/rekor-edge-max-tm/connecting/camera-software-settings/stream-configuration.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.