# System Settings

When first installing the Edge Max camera, the time and network settings should be configured.

Go to System in the left frame.

### Time

1\.      Synchronization: Select Automatic date and time (manual NTP servers).

2\.      Manual NTP Servers: Enter 192.168.0.100.

3\.      Time Zone: Select Etc/UTC.

The camera will automatically save these settings.

<figure><img src="/files/GwMiOWEajnXEPCzRIAsZ" alt=""><figcaption></figcaption></figure>

### Network

Go to Network in the left frame.

Under IPv4:

1\.      Enter IP address: 192.168.0.91.

2\.      Enter Subnet mask: 255.255.255.0.

3\.      Enter Router: 192.168.0.100.

4\.      Click Save.

<figure><img src="/files/CdoaCcX7wHz8HY4w8oiG" alt=""><figcaption></figcaption></figure>

### Status

The Status screen displays the current Device info, Time sync status, Security, Connected clients, and the Ongoing recordings. All of these settings are configurable under System.

<figure><img src="/files/ZwLXuvdL6dR39jqxwH4M" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.rekor.ai/rekor-edge-max-tm/connecting/camera-software-settings/system-settings.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.