Quick Reference Guide

A quick reference guide to help you understand the specifications and best practices for operating the Rekor Edge Pro.

Recommended Use Case
Typical Locations	Business districts, residential neighborhoods, parking lots, garages, campuses, government/business complexes
Typical Mission	Vehicle identification and ingress/egress monitoring at well-defined and marked access points

Recommended Coverage
Lane Coverage	1 lane
Distance	< 75 feet
Vehicle Speed	< 45 mph
Angle from Camera to License Plate	< 30°
Mounting Height	~12’ NOTE: This height is recommended to keep the camera out of pedestrian and vandalism range and avoid visual obstructions. Actual height limit must keep vertical angle to plate < 30°.

Capabilities
Resolution	1080p
Video Recording	Yes
Edge Video Retention	Based on available storage and scene complexity, estimated 2-5 days
Accuracy Expectation	Plate: >99% capture, >98% accuracy State: 95% accuracy NOTE: Expected accuracy when camera is properly scoped, positioned, aimed, and calibrated. Deviations to use case, coverage recommendations, and proper calibration will reduce these figures.

Best Practices

• Capture of rear license plates only

• Position the camera to have a mostly uniform lighting environment

• Avoid visual obstructions and retroreflective signage in the field of view

• Position the camera as close to a direct angle to the license plate as possible

• Use a license plate on a tripod or a parked vehicle in the intended capture area while calibrating

• Calibrate separate “day” and “night” mode camera settings using real-world day and night capture scenarios from the actual install location

• The entire vehicle should appear in the frame at the point of aim

• Target pixel density for optimal accuracy is > 120 PPF (Pixels Per Foot; 0.1” per pixel)

• The recommended minimum pixel density is 70 PPF